Process Engineer

Process Engineer Resume Keywords and Skills (Hard Skills)

Here are the keywords and skills that appear most frequently on recent Process Engineer job postings. In other words, these are the most sought after skills by recruiters and hiring managers. Go to Sample Templates ↓ below to see how to include them on your resume.

Remember that every job is different. Instead of including all keywords on your resume, identify those that are most relevant to the job you're applying to. Use the free Targeted Resume tool to help with this.

Choose a category
  • Process Engineering
  • Chemical Engineering
  • HAZOP Study
  • Engineering
  • Process Simulation
  • Piping and Instrumentation Drawing (P&ID)
  • Aspen HYSYS
  •  Find out what your resume's missing
  • Project Engineering
  • Front End Engineering Design (FEED)
  • Manufacturing
  • Process Design
  • Lean Manufacturing
  • Process Optimization
  • Commissioning
  • Oil & Gas
  • Continuous Improvement
  • Process Safety
  • EPC
  • Petroleum
  • Petrochemical
  • JMP
  • Statistical Process Control (SPC)
  • Six Sigma
  • Semiconductors
  • Validation
  • Good Manufacturing Practice (GMP)
  • Root Cause Analysis
  • Design of Experiments (DOE)
  • Project Management
  • Electronics
  • Failure Mode and Effects Analysis (FMEA)
  • Data Analysis

  •   Show full list

Resume Skills: Software

  • Minitab
  • JMP
  • QualityXpert
  • QTrendControl
  • AutoCAD
  • Matlab
  • SolidWorks
  • SAP
  • MS Project
  • MATLAB
  • Simulink
  • PLC Programming
  • MS Visio
  • CATIA
  • ANSYS
  • NX Unigraphics
  • Siemens PLM
  • SOLIDWORKS
  • Advanced Process Control (APC)
  • HYSYS
  • PI Processbook
  • ASPEN Plus
  • Microsoft Office Suite
  • TQM
  • Kaizen
  • 5S
  • ISO 9001
  • SigmaXL
  • Quality Control Charts
  • Aspen Plus
  • PRO/II
  • ChemCad
  • Process Simulators
  • COMSOL Multiphysics
  • ANSYS Fluent
  • PFDs
  • P&IDs
  • CAD Software (AutoCAD, SolidWorks)
  • MS Office Suite
  • Project Management Software
  • Aspen HYSYS
  •  Match your resume to these skills

Resume Skills: Quality Control

  • Minitab
  • JMP
  • QualityXpert
  • QTrendControl
  • TQM
  • Kaizen
  • 5S
  • ISO 9001
  • SigmaXL
  • Quality Control Charts
  • Statistical Process Control (SPC)
  • Good Manufacturing Practice (GMP)
  • Root Cause Analysis
  • QA Auditing
  • SPC
  • FMEA
  • Lean Manufacturing
  • REM
  • PDCA
  • Quality Assurance/Auditing
  • Six Sigma
  • Kanban
  •  Match your resume to these skills

Resume Skills: Engineering

  • Lean Six Sigma (Green Belt)
  • DMAIC Methodology
  • Root Cause Analysis
  • 5S Methodology
  • Lean Manufacturing
  • Six Sigma (Black Belt)
  • SPC
  • FMEA
  • DMAIC
  • P&ID
  • Process Optimization
  • Troubleshooting
  • Process Safety Management (PSM)
  • HAZOP
  • Continuous Improvement
  • Six Sigma
  • CAPA
  • 5S
  •  Match your resume to these skills

Resume Skills: Programming

Resume Skills: Project Management

Resume Skills: Process

Resume Skills: Certifications

Resume Skills: Technical

Resume Skills: Regulatory Compliance

Resume Skills: Languages

Resume Skills: Safety & Compliance Standards

Resume Skills: Lean Manufacturing

Resume Skills: IT Proficiencies

Resume Skills: Manufacturing Technologies

Resume Skills: Industries

Resume Skills: Statistical Analysis

Resume Skills: Regulatory Standards

Resume Skills: Techniques

  Does your resume contain all the right skills? Paste in your resume in the AI Resume Scan ↓ section below and get an instant score.

Compare Your Resume To These Process Engineer Skills (ATS Scan)

Paste your resume below and our AI will identify which keywords are missing from your resume from the list above (and what you need to include). Including the right keywords will help you get past Applicant Tracking Systems (i.e. resume screeners) which may scan your resume for keywords to see if you're a match for the job.

Sample Process Engineer Resume Examples: How To Include These Skills

Add keywords directly into your resume's work experiences, education or Skills section, like we've shown in the examples below. Use the examples below as inspiration.

Select a free resume example
Your Name
Process Engineer
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Resume Worded January 2021 - Present
Senior Process Engineer
Formulated a process optimization strategy, reducing production downtime by 20% and increasing efficiency by 15% using Lean Manufacturing principles
Identified and resolved process safety bottlenecks in operations, leveraging HAZOP Study methods to improve system availability by 25%
Managed a cross-functional team to complete a $2M project, utilising FEED and commissioning best practices to ensure timely delivery
Conducted regular process simulations using Aspen HYSYS to test system robustness, achieving 99% uptime
Applied Continuous Improvement methodologies, contributing to year-on-year productivity increase of 10%
Coached.com June 2018 - December 2020
Process Engineer
Led a team in a $1M project, overseeing EPC and commissioning stages to ensure 100% adherence to schedule and budget
Carried out Process Design for a key manufacturing process, which resulted in 15% cost savings using P&ID
Devised strategies for process optimization, incorporating JMP and other statistical tools to reduce process variance by 30%
ExxonMobil July 2016 - May 2018
Junior Process Engineer
Gained exposure to petroleum and petrochemical processes, assisting in plant process design leading to 10% process efficiency improvement
Supported senior engineers with process simulation tasks using Aspen HYSYS, contributing to 5% waste reduction
Participated in HAZOP studies, aiding in the identification and mitigation of safety risks
EDUCATION
Resume Worded University May 2018
Master of Science in Chemical Engineering
Emphasis on Process Optimization and Control
Resume Worded Institute May 2016
Bachelor of Engineering - Chemical Engineering
Minor in Environmental Science
Cum Laude Graduate
SKILLS
Technical Skills: Process Design, Chemical Process Optimization, Six Sigma, Lean Manufacturing
Software Proficiency: AutoCAD, MATLAB, ASPEN Plus, Minitab, SolidWorks, Microsoft Office Suite
Regulatory Compliance: OSHA, EPA, ISO Standards, Quality Assurance
Languages: English (Native), Spanish (Conversational)
OTHER
Certifications: Six Sigma Green Belt, Project Management Professional (PMP)
Leadership & Volunteering: Vice Chair, American Institute of Chemical Engineers (AIChE), Reserve Warden, Local Wildlife Sanctuary (2017-Present)
Projects: Led team to redesign petrochemical production process that reduced waste by 20%
Awards: ‘Innovator of the Year’ by Resume Worded, 2020
Your Name
Manufacturing Process Engineer
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Coached.com March 2021 - Present
Senior Manufacturing Process Engineer
Implemented Lean Manufacturing strategies, reducing production cycle time by 20% and waste by 10%
Initiated process redesign using P&ID to enhance equipment utilization, resulting in a 13% increase in production
Managed a team to successfully commission a $5M manufacturing line on schedule and within budget
Conducted HAZOP Study to drive process safety, reducing incidents by 30%
Used JMP and statistical analysis to troubleshoot process issues and improve production yield by 15%
Phillips 66 February 2019 - February 2021
Manufacturing Process Engineer
Applied Process Engineering techniques to streamline manufacturing processes, leading to a 15% improvement in operational costs
Utilized Aspen HYSYS for process simulations, contributing to the reduction of process time by 10%
Collaborated with cross-functional teams to complete FEED and commissioning of a $1.5M project within deadline
Resume Worded January 2017 - January 2019
Associate Manufacturing Engineer
Assisted in executing Lean Manufacturing principles, bolstering production efficiency by 10%
Supported in HAZOP studies to ensure process safety, contributing to incident reduction
Played a key role in a Process Design team, helping achieve a 7% production cost reduction
EDUCATION
Resume Worded Institute March 2021
Certified Six Sigma Black Belt
Project lead for Six Sigma project resulting in 18% efficiency increase
Resume Worded University December 2016
Master of Engineering in Manufacturing Systems
Specialized in production process optimization
Received 'Best Project Award' for improving assembly line efficiency
SKILLS
Manufacturing Technologies: CNC Machines, Lathe, Milling, Injection Molding, Sheet Metal Fabrication, Welding
Software: AutoCAD, SolidWorks, MATLAB, CATIA, ANSYS, MS Office Suite
Quality Control: Six Sigma, Lean Manufacturing, Kaizen, 5S, Kanban, PDCA, FMEA
Industries: Automotive, Oil and Gas, High-tech, Manufacturing, Consumer Electronics
OTHER
Certifications: Project Management Professional (PMP) - Project Management Institute (PMI)
Volunteering Experience: Mentor - Society of Manufacturing Engineers (SME)
Leadership & Awards: Elected Chair - University Engineering Society, Dean's List 2010-2016
Continuous Learning: Attended 'Machine Learning for Automation' - International Conference on Robotics and Automation (ICRA)
Your Name
Chemical Process Engineer
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
ExxonMobil April 2021 - Present
Senior Chemical Process Engineer
Spearheaded a process optimization project using Chemical Engineering principles, reducing process downtime by 15% and increasing output by 12%
Led HAZOP studies for process safety, mitigating risks and reducing safety incidents by 20%
Integrated Continuous Improvement methodologies to streamline manufacturing processes, resulting in a 10% increase in productivity
Used Aspen HYSYS for process simulation, achieving 98% system availability
Oversaw FEED and commissioning for a $3M oil & gas project, ensuring on-time and on-budget completion
Resume Worded December 2018 - March 2021
Chemical Process Engineer
Applied Petrochemical Engineering techniques for process optimization, resulting in a 10% increase in plant efficiency
Performed Process Designs for manufacturing, leading to a 15% cost reduction
Completed EPC and commissioning for a $1M project, ensuring compliance to schedule and cost targets
Coached.com October 2015 - November 2018
Process Design Engineer
Participated in a team for Process Design, leading to 7% improved efficiency
Assisted in process simulations via Aspen HYSYS, contributing to process robustness
Involved in HAZOP studies, aiding in process safety measures, resulting in reduced risk factors
EDUCATION
Resume Worded University April 2015
Master of Science (MS) - Chemical Engineering
Thesis: 'Efficiency Enhancement in Oil Refining Processes'
Resume Worded Institute May 2013
Bachelor of Science (BS) - Chemical Engineering
Minors in Mathematics and Organic Chemistry
Awards: Member of Alpha Chi Sigma; Chemical Engineering Honor Society
SKILLS
Chemical Simulation Tools: Aspen Plus, HYSYS, PRO/II, ChemCad, MATLAB
Design & Analysis Tools: AutoCAD, SOLIDWORKS, ANSYS, MS Project
Safety & Compliance Standards: OSHA regulations, EPA regulations, ISO 14001 Environmental Management, LEAN Six Sigma
Languages: English (Native), German (Conversational), Spanish (Basic)
OTHER
Certifications: Certified Six Sigma Green Belt (CSSGB), Certified Process Engineer (CPE)
Leadership & Volunteering: American Institute of Chemical Engineers, Committee Member
Projects: Reduced energy consumption in ExxonMobil's distillation unit by 10% through process optimization
Publications: Co-author of 'Process Safety in Oil and Gas Industry' in Journal of Chemical Engineering
Your Name
Process Development Engineer
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Intel Corporation February 2019 - Present
Senior Process Development Engineer
Improved the efficiency of the production process by 20% by introducing Lean Manufacturing techniques, reducing defects and downtime
Implemented Design of Experiments (DOE) methodology in development projects, eventually enhancing product performance and quality
Collaborated with R&D to optimize product designs, resulting in a 15% increase in product lifespan
Reduced waste by 5% through implementation of Statistical Process Control (SPC) methods
Pioneered the use of Minitab for data analysis, enabling faster decision making and process optimization
NXP Semiconductors March 2017 - Present
Director of Process Development
Steered a team of 25 Engineers, achieving a 98% project success rate
Introduced a new Thin Films process, enhancing product durability by 30%
Led Process Simulation initiatives, achieving a 20% increase in productivity
Ensured quality by applying Statistical Process Control (SPC), realizing a 10% reduction in defects
Leveraged Materials Science expertise to improve product design and functionality
Qualcomm June 2015 - January 2019
Process Engineer
Introduced new process simulations to optimize manufacturing efficiency, saving $250,000 annually
Performed Failure Mode and Effects Analysis (FMEA) to identify and mitigate risks in process operations
Reduced cycle time by 10% with Six Sigma methodologies, substantially increasing output
Collaborated to successfully develop and launch a new semiconductor product
Coached.com July 2011 - February 2017
Senior Process Development Engineer
Instrumental in the development of a new product, resulting in a 15% increase in market share
Implemented Six Sigma techniques, reducing waste by 10%
Assisted in the design and execution of Design of Experiments (DOE), enhancing process consistency
Coached.com April 2012 - May 2015
Junior Process Engineer
Maximized throughput by revamping workflow and introducing process improvements
Utilized JMP for data-driven improvement of process control and equipment parameters
Contributed to the development of a new thin film deposition process
Resume Worded January 2008 - June 2011
Process Development Engineer
Developed process routing improvements, resulting in a cycle time reduction of 15%
Utilized JMP for data analysis, driving the optimization of production processes
Conducted Failure Mode and Effects Analysis (FMEA), mitigating risks during process development
EDUCATION
Resume Worded Academic Center May 2015
Masters in Electrical Engineering
Specialization in Semiconductor Devices and Technology
Resume Worded University April 2010
Bachelor of Engineering - Electronic
Majored in Electronic Devices and Digital Electronics
Award: Deans Excellence List (Top 5% of the class)
SKILLS
Software Proficiency: AutoCAD, MATLAB, SolidWorks, C++
Semiconductor Processes: Thin-film deposition, photolithography, etching, oxidation and diffusion
Quality Control & Assurance: SPC, FMEA, ISO 9001, Six Sigma
Simulation Tools: ANSYS, COMSOL, LT Spice, PSpice
OTHER
Certifications: Certified Lean Six Sigma Black Belt (2017), Certified Semiconductor Process Engineer (2016)
Leadership & Volunteering: Institute of Electrical and Electronics Engineers (IEEE) - Chapter Chair (2015-Present), Volunteer at Technology for Seniors Program (2013-2015)
Projects: Reduced manufacturing defects by 20% in NXP Semiconductors, successfully managed a team to design and execute a new assembly process in Intel Corporation
Awards: Intel Best Performance Award (2020), Qualcomm Innovator of the Year (2018)
Your Name
Process Engineer
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Samsung August 2018 - Present
Process Engineering Manager
Instrumental in enhancing yield by 15% through continuous Process Engineering improvements
Directed a team of 10 Process Engineers, driving collaboration and innovation
Secured a cost savings of $1 million over 2 years through efficient resource management
Spearheaded the development of a new semiconductor product, contributing to a revenue increase of 30%
Resume Worded January 2015 - July 2018
Senior Process Engineer
Leveraged Materials Science knowledge to reduce defects in manufacturing process by 15%
Analyzed process data using Minitab, facilitating process optimization and quality improvement
Implemented Six Sigma and Lean Manufacturing techniques, reducing machine downtime by 30%
Advanced Micro Devices September 2011 - December 2014
Process Engineer
Played a key role in product development team, improving product performance by 20%
Applied Failure Analysis in resolving chronic process and product issues
Trained personnel on the use of JMP for process control, improving overall productivity
EDUCATION
Resume Worded University August 2013
Master of Science - Industrial Engineering
Specialization in Process Optimization and Lean Manufacturing
Resume Worded Institute May 2011
Bachelor of Engineering - Chemical Engineering
Focus on Material Science and Polymer Chemistry
Recipient of Performance Excellence Scholarship
SKILLS
Software & Programming: AutoCAD, MATLAB, SolidWorks, C++, Python, MS Project
Process Engineering: Lean Manufacturing, Six Sigma (Black Belt), SPC, FMEA, DMAIC, Root Cause Analysis
Simulation & Design: Process Simulators, Aspen Plus, COMSOL Multiphysics, ANSYS Fluent, PFDs, P&IDs
Quality Improvement & Control: TQM, Kaizen, 5S, ISO 9001, SigmaXL, Minitab, Quality Control Charts
OTHER
Certifications: Project Management Professional (PMP) - PMI, Certified Lean Six Sigma Black Belt - ASQ
Leadership & Volunteering: American Institute of Chemical Engineers - Local Chapter President (2016-2018), Big Brother Big Sister Program - Volunteer Mentor
Professional Development: Attended Lean Process & Six Sigma Workshop (2017), Process Engineering Summit (2016)
Languages: English (Native), Spanish (Professional Proficiency), German (Conversational)
Your Name
Process Technician
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Resume Worded January 2020 - Present
Senior Process Technician
Initiated a Lean Manufacturing approach that increased assembly line efficiency by 25%, leading to higher productivity and lower costs
Led a continuous improvement team to perform root cause analysis for recurring manufacturing issues, resulting in a 30% reduction in defective parts
Utilized Statistical Process Control (SPC) tools to routinely monitor process capability, leading to a 15% increase in yield
Implemented Preventive Maintenance routines ensuring a 20% enhancement in the uptime of machinery
Trained 15 new team members on 5S principles and techniques, resulting in a safer, cleaner and more efficient workplace
Sintel Systems April 2016 - December 2019
Process Technician
Improved process control operations by incorporating Six Sigma methodologies, driving a 10% increase in product quality
Performed detailed troubleshooting of process equipment, reducing downtime by 20%
Coordinated with engineering teams to optimize Injection Molding process performance, achieving a 15% increase in throughput
Maintained adherence to Good Manufacturing Practice (GMP) and ISO Standards, leading to zero penalties during audits
Coached.com January 2013 - March 2016
Junior Process Technician
Assisted in Kaizen events, aiding in a 10% reduction in waste
Ensured continuity of process parameters resulting in a 12 % increase in overall system efficiency
Adhered to safety protocols, maintaining a zero-incidents environment throughout my tenure
EDUCATION
Resume Worded Academic Center December 2012
Master of Engineering Management
Specialized in Process and Quality Management
Resume Worded University May 2010
Bachelor of Science in Industrial Engineering
Minor in Management Systems Engineering
SKILLS
Technical Skills: PLCs, DCS, FMEA, CAD, CMMS, HAZOP
Software: MS Office Suite, AutoCAD, SolidWorks, Matlab, Lean Six Sigma
Regulatory Compliance: OSHA, EPA, FDA, ISO 9001, ISO 14001
Languages: English(Native), Spanish(Conversational)
OTHER
Certifications: Lean Six Sigma Yellow Belt (2018), Certified Review Specialist (2014)
Leadership & Volunteering: Team Leader for Plant Efficiency Improvements Project, Volunteer with Local Food Bank
Professional Development Courses: Project Management Professional Course, Time Efficiency Seminar
Awards: Resume Worded Employee of the Year (2018), Sintel Systems Best Process Improvement Solution (2016)
Your Name
Process Engineering Technician
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Coached.com February 2020 - Present
Senior Process Engineering Technician
Engineered a shift from traditional manufacturing methodologies to Lean Manufacturing, reducing waste by 30%
Used Statistical Process Control (SPC) to monitor process capability, boosting product quality by 20%
Introduced SOLIDWORKS software for precise process engineering of plastic parts, reducing design time by 15%
Implemented Six Sigma techniques to refine process performance, leading to a 5% increment in production rates
Trained 12 junior technicians on Good Manufacturing Practice (GMP) and ISO Standards to ensure adherence to industrial standards
CDW Corporation June 2014 - January 2020
Process Engineering Technician
Led Kaizen events which resulted in a 20% improvement in overall process efficiency
Conducted preventive maintenance on process machinery, reducing downtime by 18%
Managed troubleshooting of production line equipment, ensuring continuous and efficient operations
Followed 5S methodology for workplace organization, contributing to increased productivity and safety
Resume Worded April 2010 - May 2014
Junior Process Engineering Technician
Contributed to root cause analysis activities, reducing product defects by 10%
Assisted in the implementation of continuous improvement initiatives, improving process yields by 8%
Tracked manufacturing process controls in line with ISO quality standards, maintaining optimal product quality
EDUCATION
Resume Worded Institute March 2015
Certified Process Engineer (CPE)
Completed certification alongside full-time role at CDW Corporation
Resume Worded University April 2010
Bachelor of Science in Mechanical Engineering
focus on Process and System Optimization
Academic Excellence Award for achieving over 90% in all capstone projects
SKILLS
Engineering Software: AutoCAD, CATIA, MATLAB, SolidWorks, Inventor, ANSYS Fluent
Lean Manufacturing & Six Sigma Tools: 5S, DMAIC, Root Cause Analysis, FMEA, PDCA, Workflow Diagrams
Quality Control & Testing Tools: SPC, QMS, MSA, DOE, Gage R&R
Project Management Tools: MS Project, Primavera P6, Agile, Scrum, Kanban
OTHER
Certifications: Project Management Professional (PMP), Certified Six Sigma Black Belt
Leadership & Volunteering: Mentor at Engineering Without Borders, Volunteer at local Eco-Cleanup drives
Projects: Led a cross-functional team to reduce scrap rate by 20% at Coached.com
Awards: Best Process Engineering Technician, CDW Corporation, 2017
Your Name
Manufacturing Technician
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
CDW Corporation March 2021 - Present
Senior Manufacturing Technician
Strategized and implemented Lean Manufacturing principles which reduced process time by 15%
Utilized Six Sigma to enhance product quality, leading to a 8% reduction in defects
Managed statistical process control (SPC) to ensure optimal process capability, resulting in a 20% enhancement in product yield
Conducted rigorous preventive maintenance, leading to a 30% improvement in machinery uptime
Facilitated training sessions on 5S and Root Cause Analysis for 10 junior technicians, fostering a culture of continuous improvement
Snap-On Tools June 2016 - February 2021
Manufacturing Technician
Applied Kaizen principles resulting in a 12% increase in overall efficiency
Troubleshot manufacturing equipment issues, reducing instances of machine downtime by 15%
Ensured strict adherence to GMP and ISO standards, upholding high product quality across all production lines
Resume Worded January 2013 - May 2016
Junior Manufacturing Technician
Contributed to continuous improvement initiatives, directly boosting manufacturing efficiency by 8%
Maintained process control procedures resulting in a 10% enhancement in product quality
Placed emphasis on safe work practices, achieving a 100% safety record during my tenure
EDUCATION
Resume Worded University May 2016
Master of Science in Manufacturing
Focus: Advanced manufacturing technologies
Resume Worded Institute May 2013
Bachelor of Engineering - Mechanical
Part-time studies, worked simultaneously as Junior Manufacturing Technician
Specialization: Material Science and Manufacturing Processes
SKILLS
Manufacturing Techniques: Lean Manufacturing, Six Sigma, JIT, Kanban, 5S
Technical Software: AutoCAD, SolidWorks, MATLAB, MS Project, MS Office Suite (Advanced)
Quality Control tools: SPC, FMEA, ISO and ASME standards
OTHER
Certifications: Certified Manufacturing Technician (CMfgT) - SME, Six Sigma Green Belt - ASQ
Projects: Led a cost-reduction project at Snap-On Tools which resulted in 20% savings in production costs in one year
Leadership & Volunteering: Mentor - junior technicians at CDW Corporation, Volunteer - STEM outreach program promoting technical education in local schools
Your Name
Engineering Analyst
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Resume Worded January 2022 - Present
Senior Engineering Analyst
Leveraged SQL and Python to develop data-driven strategies that improved efficiency by 27%
Launched a new testing protocol using Agile Methodologies, reducing software bugs by 40%
Managed a team of five engineers, cultivating a 5S workplace environment to optimize productivity and safety
Implemented Spotfire data visualization tools to improve the accessibility and interpretability of complex data sets
Collaborated with the software engineering team to develop a Synchro-based traffic simulation model, improving traffic flow by 18%
Coached.com June 2019 - December 2021
Engineering Analyst
Integrated AutoCAD for pipeline design and increased efficiency in the oil & gas sector by 15%
Analyzed field development scenarios using SQL and MATLAB, leading to the optimization of extraction strategies
Applied fault troubleshooting methodologies to rectify system issues, reducing downtime by 25% in the technical support department
BP May 2017 - May 2019
Junior Engineering Analyst
Used Java and JavaScript to automate data collection systems, reducing manual hours by 20% per week
Performed mechanical engineering analysis to improve assembly line efficiency by 10%
Conducted regular energy industry data analysis using Microsoft SQL Server, providing business intelligence for critical decision-making
EDUCATION
Resume Worded Institute May 2017
Master of Engineering (Structural)
Emphasis on Structural Dynamics and Earthquake Engineering
Resume Worded University May 2015
Bachelor of Science in Civil Engineering
President, Engineering Society | Honors: Dean's List (2014, 2015)
Interned with engineering company focusing on infrastructure projects
SKILLS
Engineering Software: AutoCAD, Catia, MATLAB, ETab, MS Project, Primavera P6, SOLIDWORKS
Analytical Techniques: Finite Element Analysis, Computational Fluid Dynamics, Structural Analysis, Risk Analysis
Coding: Python (Intermediate), C++ (Intermediate), Java (Basic)
Project Management: Agile & Scrum methodologies, Risk Management, Supplier Negotiation, Lean Six Sigma
OTHER
Certification: Project Management Professional (PMP), Certified Risk Management Professional
Leadership & Organizations: American Society of Civil Engineers (Member), Project Management Institute (Member)
Publication: Co-authored research paper titled 'Structural Risk Analysis in Earthquake-Prone Environments' published in Civil Engineering Journal
Your Name
Alternative Job Title: Engineering Consultant
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Resume Worded June 2022 - Present
Senior Engineering Consultant
Enhanced Spotfire and SQL data frameworks to improve business intelligence, increasing decision-making efficiency by 30%
Trained a team of seven engineers in Agile Methodologies and Python, leading to a 35% increase in project completion rates
Applied Mechanical Engineering skills to redesign manufacturing systems, achieving a 20% increase in production capacity
Streamlined workflow using 5S concept, leading to an overall improvement in team productivity by 25%
Introduced Java-based system interfaces, improving system functionality and usability by 40%
Coached.com March 2019 - May 2022
Engineering Consultant
Incorporated MATLAB and Microsoft SQL Server in the analysis of energy industry data for strategic decision-making
Optimized oil & gas extraction methodologies using AutoCAD and field development data, increasing efficiency by 18%
Conducted regular system testing and troubleshooting, resulting in a 15% decrease in technical issues
Chevron February 2017 - February 2019
Junior Engineering Consultant
Implemented JavaScript for automation of data capture systems, reducing manual work hours by 25%
Applied Synchro models to predict traffic patterns, thereby improving transport efficiency by 20%
EDUCATION
Resume Worded Academic Center July 2019
Master of Engineering Specialization in Process Improvement
Resulted in publication of a thesis on Engineering Process Optimization
Resume Worded University February 2017
Bachelor of Engineering - Mechanical
Focus on materials and system analysis
Relevant Coursework: Thermodynamics, Systems Engineering, Advanced Calculus
SKILLS
Project Management: LEAN, Six Sigma, Kaizen, Agile
Software Tools: AutoCAD, SolidWorks, MATLAB, SCADA, MS Project
Analytical Tools: Minitab, R, Python, Excel, Power BI
Engineering Disciplines: Mechanical, Electrical, Process, Industrial
OTHER
Certifications: Certified Project Management Professional (PMP), Certified Six Sigma Green Belt, Agile Certified Practitioner
Achievements: Recognized as ‘Consultant of the Year’ at Coached.com (2021), Published 'Process Optimization in Modern Industries' in respected engineering journal (2020)
Volunteering: Mentor at local Engineering Students chapter, Volunteer at Engineers without Borders
Languages: English (Native), German (Fluent), Spanish (Intermediate)
Your Name
Alternative Job Title: Engineering Project Manager
City, Country  •  (123) 456-789  •  [email protected]  •  linkedin.com/in/your-profile
EXPERIENCE
Resume Worded October 2021 - Present
Senior Engineering Project Manager
Managed oil and gas project lifecycles employing Agile Methodologies, leading to a 30% time saving in project deliverables
Oversaw a team of ten engineers, fostering an atmosphere of continuous improvement with 5S and increasing team output by 20%
Deployed Spotfire and MATLAB for trend analysis and project forecasting, increasing project success rate by 25%
Facilitated Python training programs for the engineering team, improving code efficiency by 30%
Guided successful implementation of SQL Server, reducing data processing time by 25%
Coached.com June 2018 - September 2021
Engineering Project Manager
Implemented Java and JavaScript in the development of project management software, optimizing resource allocation by 20%
Led mechanical engineering initiatives to improve assembly line efficiency, resulting in 15% process improvement
Applied AutoCAD for pipeline design optimization, driving 18% profitability in the oil & gas industry
Shell January 2016 - May 2018
Assistant Engineering Project Manager
Performed in-depth energy industry data analysis using SQL, informing business decisions and leading to a 10% increase in operational efficiency
Assisted in troubleshooting systems issues, resulting in a 12% decrease in downtime
Contributed to field development optimization using Synchro, improving extraction strategies and leading to a 15% increase in recovery rates
EDUCATION
Resume Worded University May 2018
Master of Engineering Management
Graduated with Distinction, Dean's List 2018 (Top 10%)
Resume Worded Academic Center May 2015
Bachelor of Engineering - Mechanical Engineering
Specialization in Project Management
Awards: Resume Worded Academic Excellence Award (Top 5% of Class)
SKILLS
Technical Skills: AutoCAD, MATLAB, SOLIDWORKS, MS Project, Revit, ANSYS
Project Management Tools: JIRA, Trello, Basecamp, Slack, Asana, Monday.com
Frameworks: PMBOK, Agile, Scrum, Six Sigma, Kanban, Lean
Software: MS Office Suite (Advanced), Google Workspace (Advanced), SAP (Intermediate), 3D Modeling (Intermediate)
OTHER
Certifications: Certified Project Management Professional (PMP) - Project Management Institute, Certified Scrum Master - Scrum Alliance
Leadership & Volunteering: Engineering Society of Resume Worded University (President, 2017-2018), Engineers without Borders (Volunteer, 2015-2018)
Projects: Led an engineering project for a local community center, increasing energy efficiency by 20%...
Awards: Project Manager of the Year - Coached.com (2020), Rising Star Award - Shell (2017)

How do I add skills to a Process Engineer resume?

1
Review the job posting closely.

Go through the Process Engineer posting you're applying to, and identify hard skills the company is looking for. For example, skills like Engineering, Chemical Engineering and Aspen HYSYS are possible skills. These are skills you should try to include on your resume.

2
Add industry skills like HAZOP Study and Process Engineering.

Add other common skills from your industry - such as Piping and Instrumentation Drawing (P&ID), Project Engineering and Process Simulation - into your resume if they're relevant.

3
Add skills into your work experience.

Incorporate skills - like Statistical Process Control (SPC), Front End Engineering Design (FEED) and JMP - into your work experience too. This shows hiring managers that you have practical experience with these tools, techniques and skills.

4
Highlight any software engineering or development experience.

Programming and software development are common skill sets for Process Engineer roles, so try to highlight related accomplishments in your summary, work experience or skills sections.

5
Show how you have strong attention to detail.

A good Process Engineer has strong attention to detail, so try to include examples of where you handled complex projects or processes.

6
Use the exact job title.

Try to add the exact job title, Process Engineer, somewhere into your resume to get past resume screeners. See the infographic for how to do this.

Word Cloud for Process Engineer Skills & Keywords

The following word cloud highlights the most popular keywords that appear on Process Engineer job descriptions. The bigger the word, the more frequently it shows up on employer's job postings. If you have experience with these keywords, include them on your resume.

Top Process Engineer Skills and Keywords to Include On Your Resume

Resume Skills and Keywords from Related Jobs

We also found variations and further specializations to your job title. Browse through the related job titles to find additional keywords that you can include into your resume.

Get your Resume Instantly Checked, For Free

Upload your resume and we'll spot the issues in it before an actual Process Engineer recruiter sees it. For free.

Process Engineer Resume Templates

Here are examples of proven resumes in related jobs and industries, approved by experienced hiring managers. Use them as inspiration when you're writing your own resume. You can even download and edit the resume template in Google Docs.

Resume Example
UX Engineer (Usability Engineer)


Resume Example
Cisco Network Engineer (CCNA)


Resume Example
Technical Sales Engineer


Resume Example
Software Development Engineer in Test (SDET)


Resume Example
Robotic Process Automation Engineer


Resume Example
Platform Engineer


Browse Skills from Similar Jobs

Frequently Asked Questions

What are the top skills you should add to your Process Engineer resume?

The most common skills and keywords we found on Process Engineer resumes and job postings were Process Engineering, Chemical Engineering, HAZOP Study, Engineering, Process Simulation, Piping and Instrumentation Drawing (P&ID), Aspen HYSYS and Project Engineering.

Skills like JMP, Petroleum, Commissioning, Statistical Process Control (SPC) and Front End Engineering Design (FEED) also appeared on related job postings.

How do resume skills compare between a Process Engineering Technician and a Materials And Process Engineer?

Popular skills we often see on resumes for Process Engineering Technician positions include:

  • Process Engineering
  • Manufacturing
  • Lean Manufacturing
  • Statistical Process Control (SPC)
  • Semiconductors
  • Engineering
  • Continuous Improvement
  • Design of Experiments (DOE)

In comparison, skills we see on Materials And Process Engineer resumes include:

  • Composites
  • Materials Science
  • Materials
  • Aerospace
  • CATIA
  • Metallurgy
  • Characterization
  • Research and Development (R&D)

What are good resume skills to include for different Process Engineer roles and job titles?

Depending on the specific role you apply to, you may need to emphasize different skill sets. Here are a few examples:

  • Process Engineering Specialist: Process Engineering, MATLAB, Chemical Engineering, SOLIDWORKS and Engineering
  • Manufacturing Process Engineer: Manufacturing Engineering, Lean Manufacturing, Manufacturing, Continuous Improvement and Root Cause Analysis
  • Process Engineering Manager: Engineering Management, Six Sigma, Statistical Process Control (SPC), Design of Experiments (DOE) and Process Simulation
  • Business Process Engineer: Business Process, Business Process Mapping, Business Process Management, Business Process Improvement and Business Analysis
  • Chemical Process Engineer: Chemical Process Engineering, Piping and Instrumentation Drawing (P&ID), Aspen Plus, Research and Development (R&D) and Process Design

Target your Resume to a Job Description

While the keywords above are a good indication of what skills you need on your resume, you should try to find additional keywords that are specific to the job. To do this, use the free Targeted Resume tool. It analyzes the job you are applying to and finds the most important keywords you need on your resume.

It is personalized to your resume, and is the best way to ensure your resume will pass the automated resume filters.

Start targeting your resume

© 2024 Resume Worded. All rights reserved.

Get expert insights from hiring managers
×